Magnetic strainers DN 25-150

TerFM-lux - made of low-carbon steel, hot galvanised

TerFOM-lux - made of stainless steel

The magnetic strainers are designed to removes impurities, drift by water in the heating system network, heating centers and boiler rooms. Magnetic strainers safes and ensure proper functioning of regulators, control-measuring units, heat exchangers, pumps and other installation elements. In the heating system it can be installed like by-pass filters, which works at 5÷8% of nominal water flow. Magnetic strainers can cooperates with local water supply systems, rapid sand filters. Magnetic strainers are designed for effectively clean. Maintenance of magnetic strainers is very easy.

Description:

• Inertion cleaning,
• Sedimention cleaning,
• Mechanical cleaning,
• Magnetic cleaning,
• Air separation,
• Insignificant pressure wasting.

Construction:

TerFOM-lux - made of stainless steel
TerFM-lux - made of low-carbon steel, hot galvanised
A bonnet (11) in TerFOM-lux and TerFM-lux series, asures to clean magnet inserts without the demountage of unit. It is made of acid resistance steel and it does not weaken magnetic fields.

Principle of operation

Dirty water enters through the inlet (2) and barrier (8) to the chamber (1) and reducing of flow speed. There is a magnetic fields zone made by magnet inserts (9) - (TerFOM and TerFM version only). After that water passes by the surface of perforated screen (10). Then flows through the screen and flow out the outlet (3). Unwanted impurities accumulate on the surface of the screen. The blowdown connector (6) is for cleaning the device. Pipe connectors(5) are for deaerating.

Technical data:

series		TerFOM-lux; TerFM-lux
Nominal diameter		25	32	40	50	65	80	100	125	150
Flow factor KVs(Δp=1bar)		14	28,5	31	44	57	126	183	234	272
with the magnet inserts	hot galvanised steel	TerFM-lux
	stainless steel	TerFOM-lux
connectors		flange (connctor dimensions PN-ISO7005-1)
calculated temperature		150°C
calculated pressure		standard-16 bar (for individual order 6 bar for DN80-200)
sieve mesh dimension		standard -0,4x0,4mm (for individual order from 0,05x0,05mm to 1,2x1,2mm)
capacitydm³		4,6	4,6	4,6	5,4	6,3	34	34	34	64
weight kg		9,0	9,5	10,2	13	16	40	45	50	80

Hydraulic charakteristic:

Dimensions [mm]

DN	D	H1	H	L	F*	M*
25	159	208	350	295	120	150
32	159	208	350	295	120	150
40	159	208	350	295	120	150
50	159	250	405	295	160	180
65	159	250	470	295	160	180
80	324	360	665	464	220	240
100	324	360	665	464	220	240
125	324	360	665	464	220	240
150	356	435	970	500	410	330

* Dimensions for individual orders (look to the technical data table).

Magnetic strainer TerFOM-lux 25-65

Magnetic strainer TerFM-lux 80-150

Magnetic strainer TerFOM-lux 80-150